top of page
Vontron PURO-I/ 40” (1016mm) x 8” (201mm)/ Active Membrane 400/ Permeate Flow 10,500/ Stable Rejection Rate 99.75%

Fouling Resistant: PURO Series: PURO-I

SKU : PURO-I
Vontron Strengthened RO Membrane Fouling Resistant: PURO Series: PURO-I
 
PURO-I membrane elements are more pollution-resistant and more resilient to a wide range of chemical cleaning thans to its improved cross-link strength of Polyamide desalination layer.
 
PURO Series of fouling resistant membranes normally suitable for treatment of complex water source with TDS less than 10000 ppm. It is mainly used for purification of surface water, mining waste water, municipal reclaimed water, industrial waste water, RO brackish water, etc.
 
Quantité

  • Membrane Specification

    Vontron PURO-I Membrane Elelment

    Model: 40" (1016mm) x 8" (201mm)

    Active Membrane Area ft² (m² ): 400 (37.2)

    Permeate Flow GPD(m³/d): 10500 (39.7)

    Stable Rejection Rate%: 99.75

    Feed Spacer Thickness mil: 34

  • Test Condition

    Operating pressure at 225 psi (1.55MPa)

    Temperature at 25°C

    Tested in 2000 mg/L NaCL solution

    pH 7.0 ± 0.5

    Recovery rate at 15%

bottom of page